jwst-gc pipeline monitor

g028 · 2026-09-19 09:35 EDT
1 runs 1 failing 0 flagged 0 clear 1 queued

Overview

One card per registered observation. The bar is the stage ladder in run order — reduction (unc·cal·red·i2d) then cataloging (m12→m8). Solid = every filter has it, pale = some do, STRIPED = it exists but predates an earlier stage, so it was built from inputs that have since been regenerated, hatched = the product name cannot be attributed to this observation. Click a card for the detail.

Detail

g028 · 9438/o001

/orange/adamginsburg/jwst/g028 back to overview

Stage ladder

unccalredi2dm12m3m4m5m6m7m8

Products per filter

filterunccalcrfredi2dsatm12m3m4m5m6reduced as
F070W3232·3251133333destreak
F090W3232·3251133333destreak
F115W3232·3251133333destreak
F140M3232·3251133333destreak
F150W3232·3251133333destreak
F182M3232·3251133333destreak
F210M3232·3251133333destreak
F277W88·851133333destreak
F300M88·851133333destreak
F335M88·851133333destreak
F360M88·851133333destreak
F410M88·851133333destreak
F430M88·851133333destreak
F480M88·851133333destreak

* = the product name carries no _o<obs> token and this field has more than one observation, so the count cannot be attributed to 9438/o001.

Astrometry — m2 checkpoint

filtervisitexposuresmisaligned sweptmin contrastbulk tie (mas)tie from tiles okworst tile (mas)cell checkpoint
F070W_o001 1 32 26 0 68 —/— 2026-09-12T02:51:30Z
F090W_o001 1 32 25 0 53 —/— 2026-09-12T03:20:22Z
F115W_o001 1 32 10 0 256 —/— 2026-09-12T03:49:08Z
F140M_o001 1 32 13 0 104 —/— 2026-09-12T04:17:06Z
F150W_o001 1 32 27 0 409 —/— 2026-09-12T04:45:47Z
F182M_o001 1 32 21 0 427 —/— 2026-09-12T05:16:54Z
F210M_o001 1 32 19 0 665 —/— 2026-09-12T05:46:27Z
F277W_o001 1 8 4 0 891 —/— 2026-09-12T06:14:02Z
F300M_o001 1 8 7 0 300 —/— 2026-09-12T06:25:18Z
F335M_o001 1 8 4 0 1504 —/— 2026-09-12T06:37:37Z
F360M_o001 1 8 8 0 2311 —/— 2026-09-12T06:48:14Z
F410M_o001 1 8 4 0 1577 —/— 2026-09-12T06:58:48Z
F430M_o001 1 8 4 0 1476 —/— 2026-09-12T07:08:24Z
F480M_o001 1 8 4 0 1802 —/— 2026-09-12T07:17:18Z

“tiles ok” is not a tolerance. measure_offset_grid runs with no max_off_mas, and astrometry_offsets sets off_ok=True whenever that is None — so N/N counts tiles whose offset histogram had a coherent peak, however large the offset. The column that carries the gate is worst tile, against 15 mas.

Provenance

No *.prov.json sidecars.

Queue

jobnamestateelapsedreason
41836525g0289438-o001-m7-finalizePENDING0:00(Priority)

Findings

  • fail
    F070W_o001: 26/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F070W_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA 3.3, dDec 7.6 masnrca1 visit 1: dRA -2.0, dDec -1.3 masnrca1 visit 1: dRA 3.6, dDec -4.4 masnrca2 visit 1: dRA -2.8, dDec 5.7 masnrca2 visit 1: dRA -2.9, dDec 1.4 masnrca2 visit 1: dRA -3.1, dDec -0.6 masnrca2 visit 1: dRA 1.4, dDec -3.3 masnrca3 visit 1: dRA -1.6, dDec 4.1 masnrca3 visit 1: dRA -1.6, dDec -1.3 masnrca3 visit 1: dRA 2.5, dDec -4.4 masnrca4 visit 1: dRA 2.4, dDec 4.2 masnrca4 visit 1: dRA -1.9, dDec -1.3 masnrca4 visit 1: dRA 2.1, dDec -3.9 masnrcb1 visit 1: dRA 2.3, dDec 1.7 masnrcb1 visit 1: dRA -1.8, dDec -2.3 masnrcb1 visit 1: dRA 2.0, dDec -5.1 masnrcb2 visit 1: dRA -1.8, dDec -1.1 masnrcb2 visit 1: dRA 2.1, dDec -4.8 masnrcb3 visit 1: dRA 2.4, dDec 2.3 masnrcb3 visit 1: dRA -1.7, dDec -1.2 masnrcb3 visit 1: dRA -2.1, dDec -2.7 masnrcb3 visit 1: dRA 1.8, dDec -5.7 masnrcb4 visit 1: dRA 3.6, dDec 1.8 masnrcb4 visit 1: dRA -1.5, dDec -1.5 masnrcb4 visit 1: dRA -1.7, dDec -3.2 masnrcb4 visit 1: dRA 3.1, dDec -6.3 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±8 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrca24/4
    nrcb34/4
    nrcb44/4
    nrca13/4
    nrca33/4
    nrca43/4
    nrcb13/4
    nrcb22/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca13.37.68.388.02992910.0
    1nrca1-2.0-1.32.4316.08626610.0
    1nrca13.6-4.45.6369.08605110.0
    1nrca2-2.85.76.3163.04001210.0
    1nrca2-2.91.43.2311.0108543.0
    1nrca2-3.1-0.63.2265.0113393.0
    1nrca21.4-3.33.6318.0107123.0
    1nrca3-1.64.14.469.02839510.0
    1nrca3-1.6-1.32.1270.06834810.0
    1nrca32.5-4.45.0316.06820710.0
    1nrca42.44.24.894.03370110.0
    1nrca4-1.9-1.32.3267.094533.0
    1nrca42.1-3.94.4283.090913.0
    1nrcb12.31.72.8154.04788110.0
    1nrcb1-1.8-2.32.9357.0115453.0
    1nrcb12.0-5.15.5357.0112493.0
    1nrcb2-1.8-1.12.1275.05357310.0
    1nrcb22.1-4.85.2276.05484610.0
    1nrcb32.42.33.3119.03243110.0
    1nrcb3-1.7-1.22.1288.07276710.0
    1nrcb3-2.1-2.73.5356.07235410.0
    1nrcb31.8-5.75.9337.06959910.0
    1nrcb43.61.84.0156.05330810.0
    1nrcb4-1.5-1.52.1280.0120813.0
    1nrcb4-1.7-3.23.6326.0123573.0
    1nrcb43.1-6.37.0388.0121373.0
  • fail
    F090W_o001: 25/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F090W_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA 12.6, dDec -3.4 masnrca1 visit 1: dRA -2.2, dDec 3.0 masnrca1 visit 1: dRA -2.6, dDec 1.9 masnrca2 visit 1: dRA 13.3, dDec 8.3 masnrca2 visit 1: dRA -1.8, dDec 1.6 masnrca2 visit 1: dRA 2.2, dDec -2.6 masnrca3 visit 1: dRA 18.2, dDec -11.2 masnrca3 visit 1: dRA -3.2, dDec 3.6 masnrca3 visit 1: dRA -3.3, dDec 2.0 masnrca4 visit 1: dRA 21.1, dDec -8.1 masnrca4 visit 1: dRA -2.3, dDec 2.2 masnrca4 visit 1: dRA -2.9, dDec 0.9 masnrca4 visit 1: dRA 0.8, dDec -1.9 masnrcb1 visit 1: dRA 20.3, dDec 4.2 masnrcb1 visit 1: dRA -2.9, dDec 3.5 masnrcb1 visit 1: dRA -3.1, dDec 2.2 masnrcb2 visit 1: dRA 16.9, dDec -5.4 masnrcb2 visit 1: dRA -2.0, dDec 4.1 masnrcb2 visit 1: dRA -3.1, dDec 2.7 masnrcb3 visit 1: dRA 23.1, dDec 38.2 masnrcb3 visit 1: dRA -2.0, dDec 3.0 masnrcb3 visit 1: dRA -2.3, dDec 1.7 masnrcb4 visit 1: dRA 15.2, dDec 9.3 masnrcb4 visit 1: dRA -3.7, dDec 4.4 masnrcb4 visit 1: dRA -4.0, dDec 3.0 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±38 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrca44/4
    nrca13/4
    nrca23/4
    nrca33/4
    nrcb13/4
    nrcb23/4
    nrcb33/4
    nrcb43/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca112.6-3.413.054.04791110.0
    1nrca1-2.23.03.71,261.0539993.0
    1nrca1-2.61.93.21,332.0566043.0
    1nrca213.38.315.662.04471610.0
    1nrca2-1.81.62.41,111.0557663.0
    1nrca22.2-2.63.41,161.0537433.0
    1nrca318.2-11.221.460.05409810.0
    1nrca3-3.23.64.81,317.0579023.0
    1nrca3-3.32.03.81,389.0609693.0
    1nrca421.1-8.122.653.04187810.0
    1nrca4-2.32.23.21,214.0537403.0
    1nrca4-2.90.93.11,253.0553783.0
    1nrca40.8-1.92.11,080.0515943.0
    1nrcb120.34.220.763.04629210.0
    1nrcb1-2.93.54.51,343.0547243.0
    1nrcb1-3.12.23.81,438.0567253.0
    1nrcb216.9-5.417.865.03334410.0
    1nrcb2-2.04.14.6840.0331123.0
    1nrcb2-3.12.74.1901.0359393.0
    1nrcb323.138.244.675.03982010.0
    1nrcb3-2.03.03.6995.0425963.0
    1nrcb3-2.31.72.91,038.0430813.0
    1nrcb415.29.317.878.05618410.0
    1nrcb4-3.74.45.71,438.0632733.0
    1nrcb4-4.03.05.01,499.0658093.0
  • fail
    F115W_o001: 10/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F115W_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA 3.8, dDec -3.1 masnrca2 visit 1: dRA 3.8, dDec -3.1 masnrca3 visit 1: dRA 3.5, dDec -2.6 masnrca4 visit 1: dRA 3.6, dDec -4.5 masnrcb1 visit 1: dRA -1.6, dDec 1.3 masnrcb1 visit 1: dRA -0.2, dDec 2.1 masnrcb1 visit 1: dRA 2.4, dDec -2.3 masnrcb2 visit 1: dRA 2.4, dDec -2.2 masnrcb3 visit 1: dRA 3.3, dDec -2.6 masnrcb4 visit 1: dRA 2.6, dDec -2.6 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±4 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcb13/4
    nrca11/4
    nrca21/4
    nrca31/4
    nrca41/4
    nrcb21/4
    nrcb31/4
    nrcb41/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca13.8-3.14.91,712.51660293.0
    1nrca23.8-3.15.01,789.01817053.0
    1nrca33.5-2.64.41,283.71925353.0
    1nrca43.6-4.55.71,816.51718833.0
    1nrcb1-1.61.32.1520.0318773.0
    1nrcb1-0.22.12.1984.51499413.0
    1nrcb12.4-2.33.41,517.01511253.0
    1nrcb22.4-2.23.21,199.51137753.0
    1nrcb33.3-2.64.21,376.01214303.0
    1nrcb42.6-2.63.71,802.51806993.0
  • fail
    F140M_o001: 13/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F140M_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA -1.9, dDec 3.2 masnrca1 visit 1: dRA -2.6, dDec 2.0 masnrca2 visit 1: dRA -2.4, dDec 2.5 masnrca2 visit 1: dRA -2.5, dDec 1.2 masnrca3 visit 1: dRA -0.7, dDec 2.5 masnrca3 visit 1: dRA 2.6, dDec -1.3 masnrca4 visit 1: dRA 1.3, dDec -1.6 masnrca4 visit 1: dRA 2.5, dDec -2.9 masnrcb1 visit 1: dRA 2.4, dDec -2.7 masnrcb2 visit 1: dRA 2.0, dDec -2.9 masnrcb3 visit 1: dRA 2.2, dDec -3.0 masnrcb4 visit 1: dRA -1.8, dDec 2.9 masnrcb4 visit 1: dRA -2.3, dDec 1.6 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±3 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrca12/4
    nrca22/4
    nrca32/4
    nrca42/4
    nrcb42/4
    nrcb11/4
    nrcb21/4
    nrcb31/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca1-1.93.23.71,313.31847743.0
    1nrca1-2.62.03.31,404.31901243.0
    1nrca2-2.42.53.51,383.72104493.0
    1nrca2-2.51.22.81,441.72193593.0
    1nrca3-0.72.52.61,304.72004413.0
    1nrca32.6-1.32.91,484.02114623.0
    1nrca41.3-1.62.0220.0202883.0
    1nrca42.5-2.93.81,398.02003183.0
    1nrcb12.4-2.73.61,973.01736003.0
    1nrcb22.0-2.93.51,842.51554093.0
    1nrcb32.2-3.03.81,877.51554913.0
    1nrcb4-1.82.93.41,507.72088073.0
    1nrcb4-2.31.62.81,594.72180763.0
  • fail
    F150W_o001: 27/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F150W_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA 4.4, dDec -2.2 masnrca1 visit 1: dRA -1.1, dDec 3.0 masnrca1 visit 1: dRA -1.9, dDec 1.9 masnrca1 visit 1: dRA 1.8, dDec -1.4 masnrca2 visit 1: dRA -0.1, dDec 7.7 masnrca2 visit 1: dRA -5.4, dDec 11.9 masnrca2 visit 1: dRA -5.7, dDec 10.8 masnrca2 visit 1: dRA -2.1, dDec 8.4 masnrca3 visit 1: dRA 5.8, dDec -4.6 masnrca3 visit 1: dRA 2.1, dDec -3.8 masnrca4 visit 1: dRA 4.7, dDec -2.1 masnrca4 visit 1: dRA -0.9, dDec 3.3 masnrca4 visit 1: dRA -2.0, dDec 2.1 masnrcb1 visit 1: dRA 4.5, dDec -1.9 masnrcb1 visit 1: dRA -1.0, dDec 3.2 masnrcb1 visit 1: dRA -1.7, dDec 2.0 masnrcb1 visit 1: dRA 1.6, dDec -1.3 masnrcb2 visit 1: dRA 4.2, dDec -1.0 masnrcb2 visit 1: dRA -0.4, dDec 3.5 masnrcb2 visit 1: dRA -1.5, dDec 2.5 masnrcb3 visit 1: dRA 4.1, dDec -0.9 masnrcb3 visit 1: dRA -0.8, dDec 3.0 masnrcb3 visit 1: dRA -1.5, dDec 2.0 masnrcb4 visit 1: dRA 3.9, dDec -2.1 masnrcb4 visit 1: dRA -1.2, dDec 3.1 masnrcb4 visit 1: dRA -2.0, dDec 1.8 masnrcb4 visit 1: dRA 1.4, dDec -1.4 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±12 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrca14/4
    nrca24/4
    nrcb14/4
    nrcb44/4
    nrca43/4
    nrcb23/4
    nrcb33/4
    nrca32/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca14.4-2.25.0872.0491663.0
    1nrca1-1.13.03.21,241.52792863.0
    1nrca1-1.91.92.71,347.22866583.0
    1nrca11.8-1.42.21,244.22799953.0
    1nrca2-0.17.77.7409.0464753.0
    1nrca2-5.411.913.11,395.22896773.0
    1nrca2-5.710.812.21,364.22808073.0
    1nrca2-2.18.48.71,119.22624933.0
    1nrca35.8-4.67.41,021.0507853.0
    1nrca32.1-3.84.31,416.82894703.0
    1nrca44.7-2.15.11,092.0563293.0
    1nrca4-0.93.33.41,353.03067923.0
    1nrca4-2.02.12.91,488.23241893.0
    1nrcb14.5-1.94.91,136.0572373.0
    1nrcb1-1.03.23.31,250.22785303.0
    1nrcb1-1.72.02.61,361.22912743.0
    1nrcb11.6-1.32.11,249.22769503.0
    1nrcb24.2-1.04.3771.0422683.0
    1nrcb2-0.43.53.51,315.72373873.0
    1nrcb2-1.52.52.91,695.02547043.0
    1nrcb34.1-0.94.2975.0535243.0
    1nrcb3-0.83.03.11,553.32527253.0
    1nrcb3-1.52.02.51,735.32598733.0
    1nrcb43.9-2.14.41,609.0852463.0
    1nrcb4-1.23.13.31,438.23214493.0
    1nrcb4-2.01.82.71,519.23336253.0
    1nrcb41.4-1.42.01,431.53237943.0
  • fail
    F182M_o001: 21/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F182M_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA -0.2, dDec 5.3 masnrca1 visit 1: dRA 2.8, dDec -4.1 masnrca2 visit 1: dRA -0.2, dDec 3.9 masnrca2 visit 1: dRA 0.3, dDec -2.7 masnrca2 visit 1: dRA 3.7, dDec -5.6 masnrca3 visit 1: dRA 1.1, dDec 2.9 masnrca3 visit 1: dRA 1.5, dDec -2.1 masnrca3 visit 1: dRA 0.6, dDec -3.4 masnrca3 visit 1: dRA 3.8, dDec -6.6 masnrca4 visit 1: dRA 0.6, dDec 5.0 masnrca4 visit 1: dRA 2.4, dDec -3.6 masnrcb1 visit 1: dRA -1.5, dDec 5.7 masnrcb1 visit 1: dRA 2.5, dDec -4.1 masnrcb2 visit 1: dRA -0.1, dDec 4.0 masnrcb2 visit 1: dRA 1.3, dDec -1.7 masnrcb2 visit 1: dRA 0.3, dDec -2.6 masnrcb2 visit 1: dRA 3.1, dDec -5.5 masnrcb3 visit 1: dRA -1.3, dDec 6.4 masnrcb3 visit 1: dRA 2.2, dDec -3.4 masnrcb4 visit 1: dRA 0.2, dDec 5.8 masnrcb4 visit 1: dRA 2.5, dDec -4.1 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±7 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrca34/4
    nrcb24/4
    nrca23/4
    nrca12/4
    nrca42/4
    nrcb12/4
    nrcb32/4
    nrcb42/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca1-0.25.35.3459.0411113.0
    1nrca12.8-4.15.01,374.22779373.0
    1nrca2-0.23.93.9514.0476293.0
    1nrca20.3-2.72.71,021.03453083.0
    1nrca23.7-5.66.71,498.23290423.0
    1nrca31.12.93.1611.0440663.0
    1nrca31.5-2.12.61,428.03025653.0
    1nrca30.6-3.43.41,427.03286803.0
    1nrca33.8-6.67.71,529.03212043.0
    1nrca40.65.05.0548.0420033.0
    1nrca42.4-3.64.31,465.83108153.0
    1nrcb1-1.55.75.9701.0417303.0
    1nrcb12.5-4.14.81,384.82876933.0
    1nrcb2-0.14.04.0427.0388923.0
    1nrcb21.3-1.72.11,600.02467773.0
    1nrcb20.3-2.62.6999.52658233.0
    1nrcb23.1-5.56.31,307.22612523.0
    1nrcb3-1.36.46.6721.0426533.0
    1nrcb32.2-3.44.01,770.72600233.0
    1nrcb40.25.85.8744.0666563.0
    1nrcb42.5-4.14.81,538.83231543.0
  • fail
    F210M_o001: 19/32 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F210M_o001_latest.json
    what is affected, and why
    Affected: 8/8 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrca1 visit 1: dRA -2.0, dDec 3.0 masnrca1 visit 1: dRA 3.5, dDec -4.9 masnrca2 visit 1: dRA -1.5, dDec 3.7 masnrca2 visit 1: dRA 3.7, dDec -4.3 masnrca3 visit 1: dRA -2.1, dDec 3.2 masnrca3 visit 1: dRA 3.2, dDec -5.0 masnrca4 visit 1: dRA -1.4, dDec 3.6 masnrca4 visit 1: dRA 3.7, dDec -4.5 masnrcb1 visit 1: dRA -3.9, dDec 5.8 masnrcb1 visit 1: dRA -1.0, dDec 2.2 masnrcb1 visit 1: dRA 1.6, dDec -2.5 masnrcb2 visit 1: dRA -4.0, dDec 5.8 masnrcb2 visit 1: dRA -0.6, dDec 2.0 masnrcb2 visit 1: dRA 1.5, dDec -2.3 masnrcb3 visit 1: dRA -2.4, dDec 3.1 masnrcb3 visit 1: dRA -0.1, dDec -2.0 masnrcb3 visit 1: dRA 3.0, dDec -4.8 masnrcb4 visit 1: dRA -2.4, dDec 3.3 masnrcb4 visit 1: dRA 3.2, dDec -5.1 masnrca1 nrca2 nrca3 nrca4 nrcb1 nrcb2 nrcb3 nrcb4±6 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcb13/4
    nrcb23/4
    nrcb33/4
    nrca12/4
    nrca22/4
    nrca32/4
    nrca42/4
    nrcb42/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrca1-2.03.03.61,347.22698523.0
    1nrca13.5-4.96.01,476.22968103.0
    1nrca2-1.53.74.01,410.83074203.0
    1nrca23.7-4.35.61,266.03480603.0
    1nrca3-2.13.23.91,406.52944103.0
    1nrca33.2-5.05.91,279.03465613.0
    1nrca4-1.43.63.91,390.52977603.0
    1nrca43.7-4.55.81,251.83357833.0
    1nrcb1-3.95.87.01,332.22665383.0
    1nrcb1-1.02.22.41,349.23048563.0
    1nrcb11.6-2.52.91,437.03033763.0
    1nrcb2-4.05.87.11,709.72481663.0
    1nrcb2-0.62.02.11,149.02674013.0
    1nrcb21.5-2.32.81,377.02834373.0
    1nrcb3-2.43.13.91,751.02578273.0
    1nrcb3-0.1-2.02.0826.82762903.0
    1nrcb33.0-4.85.71,400.52753983.0
    1nrcb4-2.43.34.11,464.53029143.0
    1nrcb43.2-5.16.01,288.63370063.0
  • fail
    F277W_o001: 4/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F277W_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA -0.0, dDec 2.7 masnrcalong visit 1: dRA 2.9, dDec -3.4 masnrcblong visit 1: dRA 1.1, dDec 3.7 masnrcblong visit 1: dRA 1.4, dDec -3.7 masnrcalong nrcblong±4 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong2/4
    nrcblong2/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong-0.02.72.71,162.23534273.0
    1nrcalong2.9-3.44.52,144.23447123.0
    1nrcblong1.13.73.81,785.23430023.0
    1nrcblong1.4-3.73.92,033.23508433.0
  • fail
    F300M_o001: 7/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F300M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA 2.9, dDec -5.6 masnrcalong visit 1: dRA -1.5, dDec 2.6 masnrcalong visit 1: dRA -2.0, dDec 1.4 masnrcalong visit 1: dRA 1.5, dDec -1.3 masnrcblong visit 1: dRA 1.6, dDec -6.0 masnrcblong visit 1: dRA -1.3, dDec 2.7 masnrcblong visit 1: dRA -1.8, dDec 1.5 masnrcalong nrcblong±6 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong4/4
    nrcblong3/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong2.9-5.66.3305.0178023.0
    1nrcalong-1.52.63.02,364.02704463.0
    1nrcalong-2.01.42.42,414.82789713.0
    1nrcalong1.5-1.32.02,233.02694873.0
    1nrcblong1.6-6.06.2300.0226073.0
    1nrcblong-1.32.73.02,473.02951773.0
    1nrcblong-1.81.52.42,580.03024243.0
  • fail
    F335M_o001: 4/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F335M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA -2.4, dDec 1.7 masnrcalong visit 1: dRA 3.1, dDec -3.6 masnrcblong visit 1: dRA -2.7, dDec 1.8 masnrcblong visit 1: dRA 2.8, dDec -3.6 masnrcalong nrcblong±4 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong2/4
    nrcblong2/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong-2.41.72.93,127.02579223.0
    1nrcalong3.1-3.64.73,563.02629503.0
    1nrcblong-2.71.83.32,673.82923033.0
    1nrcblong2.8-3.64.62,868.22979723.0
  • fail
    F360M_o001: 8/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F360M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA 2.0, dDec -1.4 masnrcalong visit 1: dRA -1.4, dDec 2.5 masnrcalong visit 1: dRA -2.1, dDec 1.4 masnrcalong visit 1: dRA 1.4, dDec -1.5 masnrcblong visit 1: dRA 2.0, dDec -1.4 masnrcblong visit 1: dRA -1.2, dDec 2.5 masnrcblong visit 1: dRA -2.1, dDec 1.4 masnrcblong visit 1: dRA 1.3, dDec -1.7 masnrcalong nrcblong±3 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong4/4
    nrcblong4/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong2.0-1.42.42,310.82830963.0
    1nrcalong-1.42.52.82,648.52950783.0
    1nrcalong-2.11.42.52,655.22972783.0
    1nrcalong1.4-1.52.02,617.22952253.0
    1nrcblong2.0-1.42.42,381.03051623.0
    1nrcblong-1.22.52.82,769.53187893.0
    1nrcblong-2.11.42.52,775.03157343.0
    1nrcblong1.3-1.72.12,792.53156783.0
  • fail
    F410M_o001: 4/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F410M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA -2.9, dDec 4.7 masnrcalong visit 1: dRA 3.0, dDec -3.3 masnrcblong visit 1: dRA -3.0, dDec 4.4 masnrcblong visit 1: dRA 2.7, dDec -3.7 masnrcalong nrcblong±5 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong2/4
    nrcblong2/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong-2.94.75.62,963.52998403.0
    1nrcalong3.0-3.34.52,919.82965783.0
    1nrcblong-3.04.45.32,983.53030963.0
    1nrcblong2.7-3.74.62,963.23028733.0
  • fail
    F430M_o001: 4/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F430M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA -0.6, dDec 2.8 masnrcalong visit 1: dRA 3.2, dDec -3.2 masnrcblong visit 1: dRA -0.7, dDec 2.6 masnrcblong visit 1: dRA 2.8, dDec -3.5 masnrcalong nrcblong±4 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong2/4
    nrcblong2/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong-0.62.82.82,197.32002653.0
    1nrcalong3.2-3.24.63,210.72053703.0
    1nrcblong-0.72.62.72,379.72148923.0
    1nrcblong2.8-3.54.53,315.72177723.0
  • fail
    F480M_o001: 4/8 exposures misaligned vs their visit consensus
    An exposure is misaligned when its offset exceeds 2.0 mas AND is significant against the peak error bars. At m2 this CORRECTS the offsets table and stops the run; the crf frames must be regenerated before cataloging continues.
    checkpoint_m2_F480M_o001_latest.json
    what is affected, and why
    Affected: 2/2 detectors — spread across detectors, so the frame as a whole moved: look at the offsets table and whether these exposures were regenerated from _cal after the table changed. fix_alignment SKIPS a frame that already has a RAOFFSET header, so correcting the table alone leaves stale frames in place; regenerate the working copy from _cal instead of re-applying on top.
    nrcalong visit 1: dRA -2.3, dDec 6.2 masnrcalong visit 1: dRA 3.1, dDec -3.3 masnrcblong visit 1: dRA -2.5, dDec 5.9 masnrcblong visit 1: dRA 2.6, dDec -3.7 masnrcalong nrcblong±6 mas
    Per-exposure offset vectors, coloured by detector. Solid = flagged misaligned. One colour pointing away means one detector; everything fanning out means the frame moved.
    Misaligned by detector
    nrcalong2/4
    nrcblong2/4
    visitdetectordRA (mas)dDec (mas)off (mas)contrastpairswindow ("")
    1nrcalong-2.36.26.63,903.51569283.0
    1nrcalong3.1-3.34.54,179.01589303.0
    1nrcblong-2.55.96.44,306.01787363.0
    1nrcblong2.6-3.74.54,405.01790483.0
  • ok
    m7 cross-band product absent
    catalogs/basic_*_photometry_tables_merged_*.fits
  • ok
    m8 cross-band product absent
    catalogs/basic_*_photometry_tables_merged_*.fits
  • ok
    1 job(s) in the queue (0 running)
    g0289438-o001-m7-finalize
    squeue
Generated 2026-09-19 09:35 EDT. Every number here is read from what the pipeline recorded — the tolerances are the ones the pipeline itself enforces, and no offset is re-measured for this page.